Electronics Cooper Sputtering System / Military electronics Chips
Directly Plating Copper Sputtering Equipment
Cooper Magnetron Sputtering Coating Plant on Military electronics
The DPC process- Direct Plating Copper is an advanced coating
technology applied with LED / semiconductor / electronic
industries. One typical application is Ceramic Radiating Substrate.
Cooper conductive film deposition on Al2O3, AlN, Si, Glass
substrates by PVD vacuum sputtering technology, compared with
traditional manufacturing methods: DBC LTCC HTCC, the features:
1. Much lower production cost.
2. Outstanding thermal management and heat-transfer performance
3. Accurate alignment and pattern design,
4. High circuit density
5. Good adhesion and solderability
Royal technology team assisted our customer to developed the DPC
process successfully with PVD sputtering technology.
Due to its advanced performance, the DPC substrates are widely used
in various applications:
High brightness LED to increase the long life time because of its
high heat radiation performance, Semiconductor equipment, microwave
wireless communication, military electronics, various sensor
substrates, aerospace, railway transportation, electricity power ,
etc
RTAC1215-SP equipment is exclusively designed for DPC process which
get the cooper layer on substrates. This equipment utilizes PVD
physical vapor deposition principle, with multi-arc ion plating and
magnetron sputtering techniques to obtain the ideal film with high
density, high abrasion resistance, high hardness and strong binding
in high vacuum environment. It is the crucial step for rest DPC
process.
Copper Sputtering Coating Machine Key Features
1. Equipped with 8 steer arc cathodes and DC Sputtering Cathodes,
MF Sputtering Cathodes, Ion source unit.
2. Multilayer and co-deposition coating available
3. Ion source for plasma cleaning pre-treatment and Ion-beam
assisted deposition to enhance the film adhesion.
4. Ceramic/ Al2O3/AlN substrates heating up unit;
5. Substrate rotation and revolution system, for 1-side coating and
2-sides coating.
Copper Sputtering Coating Machine Specifications
Performance
1. Ultimate Vacuum Pressure: better than 5.0×10-6 Torr.
2. Operating Vacuum Pressure: 1.0×10-4 Torr.
3. Pumpingdown Time: from 1 atm to 1.0×10-4 Torr≤ 3 minutes ( room temperature, dry, clean and empty chamber)
4. Metalizing material (sputtering + Arc evaporation): Ni, Cu, Ag,
Au, Ti, Zr, Cr etc.
5. Operating Model: Full Automatically /Semi-Auto/ Manually
Structure
The vacuum coating machine contains key completed system listed
below:
1. Vacuum Chamber
2. Rouhging Vacuum Pumping System (Backing Pump Package)
3. High Vacuum Pumping System ( Magnetically Suspension Molecular
Pump)
4. Electrical Control and Operation System
5. Auxiliarry Facility System (Sub System)
6. Deposition System
Copper Plating Samples
Please contact us for more specifications, Royal Technology is
honored to provide you total coating solutions.
Download the brochure, please click here: Direct Plating Copper machine- DC and MF magnetro...
